Ommands of, Signamax, 2. commands of cli – First Virtual Communications 065-7710 User Manual

Page 155

Advertising
background image

Signamax

065-7710 8-Port 10/100BaseT/TX + 2SFP Managed Switch

Publication date: January, 2006

Revision A1

147

4-2. Commands of CLI

To see the commands of the mode, please input “?” after the prompt, then all

commands will be listed in the screen. All commands can be divided into two
categories, including global commands and local commands. Global commands can
be used wherever the mode you are. They are “exit”, “end”, “help”, “history”, “logout”,
“save start”, “save user”, “restore default” and “restore user”. For more details,
please refer to Section 4-2-1.

Command instructions reside in the corresponding modes are local

commands. The same command with the same command name may occur but
perform totally different function in different modes. For example, “show” in IP mode
performs displaying the IP information; however, it performs displaying the system
information in system mode.

For more details, please refer to Section

4

-2-2.

Fig. 4-3

065-7710

065-7710

Advertising