Signamax – First Virtual Communications 065-7710 User Manual

Page 61

Advertising
background image

Signamax

065-7710 8-Port 10/100BaseT/TX + 2SFP Managed Switch

Publication date: January, 2006

Revision A1

53

Speed/Duplex:

Set the speed and duplex of the port. In speed, 10/100Mbps baud rate is
available for Fast Ethernet, Gigabit module in port 9, 10. If the media is
1Gbps fiber, it is always 1000Mbps and the duplex is full only. If the
media is TP, the Speed/Duplex is comprised of the combination of speed
mode, 10/100/1000Mbps, and duplex mode, full duplex and half duplex.
The following table summarized the function the media supports.

Media type

NWay

Speed

Duplex

100M TP

ON/OFF

10/100M

Full/Half

1000M TP

ON/OFF

10/100/1000M

Full for all, Half for 10/100

1000M Fiber

ON/OFF

1000M

Full

In Auto-negotiation mode, no default value. In Forced mode, default
value depends on your setting.

Flow Control:

There are two modes to choose in flow control, including Symmetric and
Asymmetric. If flow control is set Symmetric, both parties can send
PAUSE frame to the transmitting device(s) if the receiving port is too
busy to handle. When it is set Asymmetric, this will let the receiving port
care the PAUSE frame from transmitting device(s), but it doesn’t send
PAUSE frame. This is one-way flow control.

Default: Symmetric.

Advertising