Fluke 9933 - Manual (Page 14)

Enabled and disabled
All tabs are enabled at all times.
Dialog information
The TableWare Defaults dialog allows the user to set default values or parame-
ters by selecting any of the three tabs; General, Tables, or Resolutions. The
General tab is for selecting TableWare setup defaults or preferences. The Tables
tab is for selecting the default settings specific to generated tables. The Resolu-
tions tab is for specifying decimal place settings for reference readings, residu-
als, UUT readings, and CJC readings.
2.1.1 Defaults - General
The General tab (Figure 4) is displayed when the File|Defaults menu option is
selected and the tab labeled General is selected.
Enabled and disabled
All controls are enabled at all times.
Dialog information
The File|Defaults General tab determines the default setting for software de-
faults or preferences.
9933 TableWare
User’s Guide
10
Figure 4 Defaults-General