Fluke 9933 - Manual (Page 63)

Message “An error occurred while calculating coefficient type coefficients.
Make sure the CALCCOEF.DLL file is located in the \WINDOWS\SYSTEM
or \WINNT\SYSTEM directory.
[Error: error number - description]"
Remarks The selected coefficients could not be calculated. The reason is de-
scribed by the error number - description message. Check the raw data for mis-
takes or change the type of coefficients to calculate and try again.
Message “An error occurred while printing the [table][raw data]: Message.”
Remarks TableWare was not able to print the table or raw data on the report
because of the problem described in the Message.
Message “An error occurred while exporting coefficient type report data to
filename.
[Error: error number - description]"
Remarks The report could not be exported to the file filename because of the
problem described by the error number - description message.
Message “An error occurred while importing [coefficient type] raw data from
filename.
[Error: error number - description]"
Remarks The raw data file filename could not be imported because of the
problem described by the error number - description message.
Message “An error occurred while calculating coefficient type coefficients.
Error: error number - description“
Remarks The selected coefficients could not be calculated. The reason is de-
scribed by the error number - description message. Check the raw data for mis-
takes or change the type of coefficients to calculate and try again.
Message “An error occurred while calculating coefficient type table values.
Error: error number - description“
Remarks The selected table could not be generated. The reason is described by
the error number - description message. Check the raw data and/or coefficients
for mistakes and try again.
Message “An error occurred while retrieving standard Thermocouple coeffi-
cients. Make sure the CALCCOEF.DLL file is located in the \WIN-
DOWS\SYSTEM or \WINNT\SYSTEM directory.”
Remarks In order to generate a table using Thermocouple coefficients, the soft-
ware must retrieve the standard coefficients from the CALCCOEF.DLL file. This
file was most likely either not found or may not be the correct version. Make sure
this file exists in the \WINDOWS\SYSTEM or \WINNT\SYSTEM directory.
59
6 Messages
TableWare Error Messages