Fluke 9933 - Manual (Page 40)

3.5.1.3 Table options—other settings
The Other Settings tab is displayed after selecting the Other Settings tab on the
Table Options dialog.
Enabled and disabled
All controls are enabled at all times.
Dialog information
The Other Settings tab allows the user to select the delimiter for exporting ta-
bles and the starting page number and font for printing tables. These values de-
fault to the values specified on the File|Defaults Tables tab.
The Export delimiter allows the user to specify the delimiter used to separate
values when exporting a table to an ASCII text file. The user may select either
a Tab or a Comma as the delimiter.
The Starting page number allows the user to specify the page numbers printed
on the table report. The starting page number must be between 1 and 10.
The font type and size can also be selected by the user. The list of fonts consists
of all fonts supported by the default printer. Allowable font sizes are from 6
point to 12 point. A sample of the selected font is displayed below the font
selection.
3.6 Table temperature range chart
Due to the nature of the equations used to generate tables, the temperature
range that can or should be used to generate a table depends on the type of co-
9933 TableWare
User’s Guide
36
Figure 25 Table Options - Other Settings