FieldServer FS-8704-06 - Manual (Page 6)

FS-8704-06 BACnet IP Driver Manual Page 6 of 57
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
3 HARDWARE CONNECTIONS
It is possible to connect a BACnet/IP device using the N1 or the N2
3
network ports. These ports need to be
configured for BACnet/IP in the configuration file.
Configure the Controller according to manufacturer’s instructions
FieldServer
FieldServer Part #
8915-10
UTP cable
Connect to an Ethernet Port
on the FieldServer
N1
1 8
Hub/Router
Remote BACnet IP
Device
3 Not all ports shown are necessarily available on the hardware. Consult the appropriate Instruction manual for details of the ports available on
specific hardware.