Frymaster Super Runner Series User Manual
Page 40
DEAN MILLIVOLT GAS FRYERS
CHAPTER 2: PARTS LIST
2-17
2.5.1 Oil Drain Manifold, Drain Flush and Drain Valve Components (cont.)
ITEM
PART #
COMPONENT
1
823-3565
Elbow, with Bracket (LH)- 1-¼"- UFF 50
*
823-3566
Elbow, with Bracket (RH)- 1-¼"- UFF 50
2
812-1524
Drain Pipe, Left Side (Use 823-3418 for Chili’s)
3
813-0784
Drain Pipe, Right Side 1 ½” x 6”
4
813-0829
Elbow, 1-½" NPT 75°
5
813-0748
Tee, 1-½” NPT x 1-¼" BM With Handle Bracket
6
200-1827
Drain Manifold Tube- 1-½” x 13-¼"
7
813-0659
Pipe Cap, 1-½"
8
809-0884
Nut, Slip Joint- 1-½"
*
816-0544
O-ring (Slip-Joint Nut)
9
813-0686
Bell Reducer, ½" NPT x 1-½"
10
813-0165
Elbow, Street- ½" NPT 90°
11
813-0672
Nipple, ½” NPT x 8" BM
12 810-1669
Adapter,
⅝" O.D. x ½"- Female
13 810-1069
Flex
Line,
⅝" x 29-½ "
14 810-1668
Adapter,
⅝" O.D. x ½"- Male
Drain Valve Components
15
106-1401
Bracket, Microswitch (Optional On SUFF/UFF Units)
16
200-1617
Washer, Drain Valve (Use Without Microswitch)
17
210-2029
Bracket, Activator- Microswitch (Also Used On Valves Without Microswitch As A
Handle-Stop)
18
210-4727
Handle (Actuator), Drain Valve
*
823-3440
Handle, Push/Pull- Drain (With Cap)
* 809-0885
Washer,
⅜” x 1” x .083"
* 809-0843
Pin,
Cotter
* 816-0547
Cap,
Vinyl-Red
19 807-2104 Microswitch
(Optional On SUFF/UFF Units)
20
809-0842
Nut, Nylock- #4-40 (Microswitch To Bracket)
21 816-0220 Insulation,
Microswitch
22 200-1257 Retainer,
Nut
23
810-2127
Drain Valve, 1-½" Full Port (With Washers & Nut)
24
810-2052
Drain Valve, 1-¼" (1" Standard Port)
*
810-2442
Handle, Valve Lever
*
810-1338
Drain Valve, 1" SM20G, SR42G see note below
*
210-3902
Handle, Valve Lever (For 810-1338 Only)- SM20G
*
106-1417SP
Drain Valve Assembly 1” RH and LH
*
813-0138
Nipple, 1" NPT x Close (To Adapt To 1-¼" Extended Drain Nipple)
*
813-0716
Bushing, 1" NPT x 1-¼" BM (To Adapt To 1-¼" Extended Drain Nipple)
*
813-0406
Coupling, 1-¼" NPT x 2" (To Adapt To 1-¼" Extended Drain Nipple)
25
810-2126
Drain Valve, 1-¼" Full-Port (Use 106-2439 for Assembly)
*
812-1226SP
Nipple, Drain- 1-¼" Painted- SM Series Fryers (use 813-0276 for SM20)
*
813-0392
Nipple, Drain- 1-¼” NPT x 8" BM- All SR Series Fryers except SR42 w/ 1”
*
812-1681
Nipple, Drain- 1-¼” x 5” NPT
*
813-0870
Nipple, Drain- 1-¼” x 10” NPT
*
813-0669
Nipple, Drain- 1” x 8” (Use 812-1668 for 5”-SR42) (Use 813-0605 for 9”- SR62)
* Not Illustrated
Note: In Mar. 2003 SR42G went to 1” drain valves.