Specifications, Plumbing, Ventilation clearances – Follett E50CT400A User Manual

Page 5: Electrical, Ambient

Advertising
background image

5

Plumbing

25/50C with

25/50H with

25/50C with

25/50H with

25/50FB

Satellite-fill

Satellite-fill

integral

integral

icemaker

icemaker icemaker icemaker icemaker

in

base

Dispenser drain

1

3/4" FPT

3/4" ID tubing

3/4" FPT

3/4" ID tubing

3/4" FPT

Icemaker drain

1

3/4" MPT

3/4 MPT

3/4" MPT

Dispenser water inlet

2

3/8" push-in

3/8" push-in

3/8" push-in

3/8" push-in

3/8" push-in

Satellite-fill IM water inlet

2

3/8" push-in

3/8" push-in

Cond. inlet – w/c only

3/8" FPT

3/8" FPT

3/8" FPT

3/8" FPT

3/8" FPT

Cond. drain – w/c only

3/8" FPT

3/8" FPT

3/8" FPT

3/8" FPT

3/8" FPT

Note: Water shut-off recommended within 3m (10 feet) of dispenser. Drain to be hard piped and insulated, and
maintain slope of at least 20mm per 1m run (1/4" per foot) of slope. All plumbing connections must be made in
accordance with local building codes.

Ventilation clearances

Countertop and wall mount models with Satellite-fill icemaker (C/E25CR400A/W, C/E50CR400A/W,

C/E25HR400A/W, C/E50HR400A/W) — none. 305mm (12") at top advised for service.

Countertop and wall mount models with integral icemaker (C/E25CT400A/W, C/E50CT400A/W,

C/E25HT400A/W, C/E50HT400A/W) — 153mm (6") at top. 153mm (6") each side advised for service.

Freestanding models (C/E25FB400A/W, C/E50FB400A/W) — 102mm (4") at rear. 305mm (12") at top advised for
service.

1 Includes adapter kit to 3/4" barb fitting and 6' 3/4" ID vinyl tube

2 Includes adapter kit – 6' 3/8" OD tubing and adapter to 1/2" BSP

Specifications

Electrical

1.

Models with Satellite-fill icemakers (C/E25CR400A/W, C/E50CR400A/W, C/E25HR400A/W,

C/E50HR400A/W)

Icemaker

Dispenser

Basic electrical: 220V 60Hz/230V 50Hz

5 amps

1.5 amps

2.

Freestanding models and models with integral icemakers (C/E25FB400A/W, C/E50FB400A/W,

C/E25CT400A/W, C/E50CT400A/W, C/E25HT400A/W, C/E50HT400A/W)

Total

system

Basic electrical: 220V 60Hz/230V 50Hz

6.5 amps

3.

Dispensers and Satellite-fill icemakers are supplied with a 2m (7ft) power cord.

Ambient

Air temp

38°C/100°F max.

10°C/50°F min. (best performance below 27˚C/80°F)

Water temp

32°C/90°F max.

4°C/40°F min. (best performance below 21°C/70°F)

Water pressure

4.8 bar/70 P.S.I. max.

.69 bar/10 P.S.I. min.

Advertising
This manual is related to the following products: