Furuno FR-2125V User Manual
Page 18
Advertising
1-11
Monitor
J582
J581
Control Head Cable
Clamp
Remove clamp
from left side
Remove clamp from rear side
Figure 1-14 Clamp position
11. Unfasten four upset screws (
6
) at the bottom of the right and left KB arms to
dismount the control head.
12.Unfasten three screws (M4X10) and two screws (M4X8) to remove the right
lower cover (
7
) and the left lower cover (
8
).
Right Lower Cover (
7
)
Pan-head Screw (M4X10, 3 pcs., upper)
Binding Screw (M4X8, 2 pcs., lower)
Pan-head Screw (M4X10, 3 pcs., upper)
Binding Screw (M4X8, 2 pcs., lower)
Left Lower Cover (
8
)
Right KB Arm
Upset Screw (
6
)
(M5X25, 4 pcs.,
including those on
opposite side)
Control Head
Figure 1-15 Display unit, front view
Advertising