Furuno FR-2125V - Manual (Page 27)

2-5
2.2 Display Unit
Two cables are terminated at the display unit: the signal cable S03-75 and the
power cable. The signal cable comes with a connector preattached to it for con-
nection to the display unit. Fabricate the power cable as shown on the next page.
J106
J105
J104
J103
J446
J466
J462
J465
POWER Switch
POWER Switch in AC
Powered Display Unit
The display unit designed to run on AC
power has a power switch inside its
base which cuts off 100/200 VAC power
to the display unit. Pull the display unit
forward several centimeters to access
the switch. TURN THE SWITCH OFF
(as well as the main POWER switch)
WHENEVER ACCESSING INSIDE THE
DISPLAY UNIT.
Display unit, inside view