FUJITSU fi-6130 User Manual
Page 107
Advertising
The [Setup] dialog box appears.
10. Select the [Event] tab.
11. Click the action of the Event you selected in step 5, and then select a profile from the list you want
to use for scanning.
HINT
You have to create profiles beforehand.
For information about how to create profiles, refer to "
Batch Scan
" in Section "
"
12. Click the [OK] button.
13. Exit ScandAll PRO.
When you press the linked button, ScandAll PRO starts up, and batch scan is executed according to the selected
profile’s settings.
Advertising
This manual is related to the following products: