FUJITSU fi-6130 - Manual (Page 98)

6. Under [Select Current Image Setting], select a side, and then configure settings for each side in
the [TWAIN Driver] dialog box.
You need to configure both of the settings for [Color/Grayscale] detection and for [Binary] detection in advance.
7. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section " 2.6 How to Use ScandAll PRO. "
Scanned document images are displayed in the ScandAll PRO window.
All Rights Reserved. Copyright 2007 © PFU LIMITED