FUJITSU fi-6130 User Manual
Page 88
fi-6130 / fi-6230 Image Scanner Operator's Guide
CONTENTS MAP
3.9 Detecting Multifeeds
"Multifeed" is a feeding error that occurs when two or more sheets in the ADF paper chute are fed simultaneously into the scanner.
You can set the scanner to detect multifeed, stop scanner operation, and display an error message.
To set the scanner to detect multifeed, change the settings in the [TWAIN Driver] dialog box or in the Software Operation Panel.
For how to configure the settings using the Software Operation Panel, see Section "
"
The following shows the procedure to change settings in the FUJITSU TWAIN 32 Scanner Driver.
1. Place the document on the ADF paper chute.
For details on how to place documents, see Section "
2.2 Loading Documents on the ADF for Scanning.
"
2. Launch ScandAll PRO.
From the [Start] menu, select [All Programs] → [Fujitsu ScandAll PRO] → [Fujitsu ScandAll PRO] in the order presented.
Then, ScandAll PRO starts up.
3.
From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the scanner driver's setup dialog box, see Section "
4. In the [TWAIN Driver] dialog box, click the [Option] button.
The [Option] dialog box appears.
5.
Select the [Job/Cache] tab.