Fujitsu Siemens Computers Stylistic ST5112 - Manual (Page 51)

43
C a r e a n d M a i n t e n a n c e
3. Arrow down to the Boot Device Priority submenu.
Press [Enter].
4. If “Optical Media Drive” or “CD-ROM Drive” is not
at the top of the list, arrow down to the drive in the
list, and press the space bar (or the + key) to move it
to the top of the list. (The system attempts to boot
from the devices in the order in which they are
listed.). Note that the BIOS for some systems will
indicate “CD-ROM Drive”, even when a DVD drive is
connected.
5. If you have an external DVD drive connected,
proceed to the next step; otherwise, proceed to
step 7.
6. If you have an external DVD drive connected:
• Select the Advanced menu in the BIOS window.
• Scroll down to the USB Features submenu and
press the Enter key to open it.
• If Legacy USB Support is disabled, press the space
bar to enable it.
• Scroll down to SCSI SubClass Support and press
the space bar to enable it.
7. Press [F10], then click on [Yes] to exit the BIOS Setup
Utility and return to the boot process.
After you have changed the boot priority, you can restore
a backup image when you are booting up.
Procedure
1. Turn on the power to your system.
2. Ensure that you have a device that can read DVDs
either installed in your system or attached externally
to it.
3. Insert the Restore Disc into the drive tray.
4. Reboot your system.
5. After the system reboots, follow the instructions that
appear to either restore your system image or erase
all data from your hard disk.
AUTOMATICALLY DOWNLOADING
DRIVER UPDATES
Your system has a convenient tool called the Fujitsu
Driver Update (FDU) utility. With FDU, you can choose
to automatically or manually go to the Fujitsu site to
check for new updates for your system.
The FDU icon should appear in the system tray at
the bottom right of your screen (roll the cursor over the
icons to find the correct one). If the FDU icon does not
appear in the system tray, it can be started by going to
[Start] -> All Programs, and clicking on Fujitsu Driver
Update; this will create the icon automatically.
To invoke the FDU menu, right-click on the FDU icon.
The menu contains the following items:
■ Check for updates now
Allows for manual driver update search. The first time
it is used, you are prompted to agree to a user agree-
ment. After clicking on the icon, the FDU automati-
cally connects with the Fujitsu site to check for updates
and downloads them. While downloading, the icon
has a red bar through it, indicating that it cannot be
used while the download is in process. When the
update is complete, a message appears informing you
of the fact.
■ Enable Automatic Update Notifications
Automatically searches for new updates on a regular
basis (approximately every 3 days).
■ Show update history
Brings up a screen that displays a history of updates
that have been made via the FDU.
■ About Fujitsu Driver Update
Displays the FDU version number and copyright
information
■ Fujitsu Driver Update Readme
Displays the FDU readme.
Osian_UG.book Page 43 Tuesday, December 18, 2007 9:20 AM