Fujitsu Siemens Computers Stylistic ST5112 User Manual

Page 61

Advertising
background image

53

W i r e l e s s L A N U s e r ’ s G u i d e

FCC REGULATORY INFORMATION

Please note the following regulatory information related to the
optional wireless LAN module.

Regulatory Notes and Statements
Wireless LAN, Health and Authorization for use

Radio frequency electromagnetic energy is emitted from Wireless
LAN devices. The energy levels of these emissions, however, are far
much less than the electromagnetic energy emissions from wireless
devices such as mobile phones. Wireless LAN devices are safe for
use by consumers because they operate within the guidelines found
in radio frequency safety standards and recommendations. The use
of Wireless LAN devices may be restricted in some situations or
environments, such as:

On board an airplane, or

In an explosive environment, or

In situations where the interference risk to other devices or ser-
vices is perceived or identified as harmful.

In cases in which the policy regarding use of Wireless LAN devices
in specific environments is not clear (e.g., airports, hospitals, chem-
ical/oil/gas industrial plants, private buildings), obtain authoriza-
tion to use these devices prior to operating the equipment.

Regulatory Information/Disclaimers

Installation and use of this Wireless LAN device must be in strict
accordance with the instructions included in the user documenta-
tion provided with the product. Any changes or modifications
made to this device that are not expressly approved by the manufac-
turer may void the user’s authority to operate the equipment. The
manufacturer is not responsible for any radio or television interfer-
ence caused by unauthorized modification of this device, or the
substitution or attachment of connecting cables and equipment
other than those specified by the manufacturer. It is the responsi-
bility of the user to correct any interference caused by such unau-
thorized modification, substitution or attachment. The
manufacturer and its authorized resellers or distributors will
assume no liability for any damage or violation of government
regulations arising from failure to comply with these guidelines.

This device must not be co-located or operating in conjunction
with any other antenna or transmitter.

Federal Communications Commission statement

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions: (1) This
device may not cause interference, and, (2) This device must accept
any interference, including interference that may cause undesired
operation of this device.

FCC Interference Statement

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy.
If not installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.

If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try and correct the interference
by one or more of the following measures:

1.

Reorient or relocate the receiving antenna.

2.

Increase the distance between the equipment and the receiver.

3.

Connect the equipment to an outlet on a circuit different from
the one the receiver is connected to.

4.

Consult the dealer or an experienced radio/TV technician for
help.

FCC Radio Frequency Exposure statement

The available scientific evidence does not show that any health
problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices
are absolutely safe. Low power wireless devices emit low levels of
radio frequency energy (RF) in the microwave range while being
used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure to low-level RF that does not produce
heating effects causes no known adverse health effects. Many
studies of low-level RF exposure have not found any biological
effects. Some studies have suggested that some biological effects
might occur, but such findings have not been confirmed by addi-
tional research. The wireless LAN radio device has been tested and
found to comply with FCC radiation exposure limits set forth for an
uncontrolled equipment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65.

The maximum SAR values measured from the devices are:

Intel PROSet Wireless LAN (WM3945ABG): 1.47 W/kg

Atheros Wireless LAN (AR5BX6): 1.57 W/kg

Intel PROSet Wireless LAN (WM3945ABG) + Bluetooth

Simultaneous: 1.47 W/kg

Atheros Wireless LAN (AR5BX6) + Bluetooth Simultaneous:

1.56 W/kg

Export restrictions

This product or software contains encryption code which may not
be exported or transferred from the US or Canada without an
approved US Department of Commerce export license. This device
complies with Part 15 of FCC Rules., as well as ICES 003 B / NMB
003 B. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may
cause undesirable operation. Modifications not expressly autho-
rized by Fujitsu Computer Systems Corporation may invalidate the
user's right to operate this equipment.

Canadian Notice

The device for the 5150-5250 MHz band is only for indoor usage to
reduce the potential for harmful interference to co-channel mobile
satellite systems.

The maximum antenna gain of 6 dBi permitted (for devices in the
5250-5350 MHz, 5470-5725, and 5475-5825 MHz bands) to comply
with the e.i.r.p. limit as stated in A9.2 of RSS210.

In addition, users should also be cautioned to take note that high
power radars are allocated as primary users (meaning they have
priority) of 5250-5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN devices.

Osian_UG.book Page 53 Tuesday, December 18, 2007 9:20 AM

Advertising