FUJITSU ISSUE 02 3XAX-00803AAS - Manual (Page 10)

Preface In Commercial Confidence
Page x ADSL USB Modem - User Manual
Issue 02 March 02 FTEL
What this Manual Covers
This manual contains the following information:
Chapter 1 “Introduction”—This chapter describes, what ADSL is, tells you about Protocols and
Device Drivers and the main features of the ADSL USB Modem.
Chapter 2 “Installation and Software Setup for PCs Running Windows” —This chapter tells you
the requirements for your PC, what information you need to gather before you start the installation
and how to install the modem and software.
Chapter 3 “Installation and Software Setup for an Apple Macintosh Computer”—This chapter tells
you the requirements for your Macintosh, what information you need to gather before you start the
installation and how to install the modem and software.
Chapter 4 “Managing the Software”—This chapter describes updating software, removing
software and customising settings.
Appendix A “Product Specifications”—This appendix lists technical specification of the ADSL
USB Modem
“Glossary”—This is a glossary of terms for this manual.
Conventions Used in this Manual
The conventions used for the procedures in this manual are described below.
Commands
Commands are always referred to by using the word “click” before them. These commands are
always shown as bold-faced words. For example, click
Next , click OK , or click Cancel .
Names of Windows (Dialog Boxes)
The names of the windows (also referred to as dialog boxes) that appear on the PC screen are
always referred to in quotes. For example, the “Setup Complete” window.
Names of Options in Windows
The names of options to choose from inside the windows that appear on the PC screen are always
referred to in italics. For example, choose the Yes, I want to restart my computer now option from
the window.
Notes
In some cases, preparatory or cautionary information is needed before proceeding onto the next step
in an installation process. This kind of information is provided in the form of notes, for example
Note: To access the Control Panel, the driver must be running. Also, make sure the USB cable
is plugged into the modem.