FUJITSU ISSUE 02 3XAX-00803AAS - Manual (Page 60)

Installation and Software Setup for an Apple Macintosh Computer In Commercial Confidence
Page 3 - 10 ADSL USB Modem - User Manual
Issue 02 March 02 FTEL
2. Press <Ctrl 1> to view the additional tab options (as shown below), then select the
Configuration tab.
3. Verify that the Configuration tab shows the VPI/VCI default values below. Do not
change these unless instructed by your service provider.
Configuration Default Value
Modulation Multimode
VPI 0
VCI 38
Encapsulation Mode RFC-2364 Vc multiplexed PPP
ATM Mode PPP over ATM
4. Click Apply and exit the Modem Setup window.
5. Connect your modem as shown in Procedure 3-4.
Procedure 3-3: Creating a Dial-up Connection (Continued)