Operation, En-7, Press the start/stop button (fig.6 p ) – Friedrich MW12C3E User Manual

Page 10

Advertising
background image

En-7

Example: When set to COOL

Example: When set to 80 °F

To Select Mode Operation

1

Press the START/STOP button (Fig.6 P).

The indoor unit’s OPERATION indicator lamp (red) (Fig. 3 5) will light.
The air conditioner will start operation.

2

Press the MASTER CONTROL button (Fig.6 K) to se-
lect the desired mode.

Each time the button is pressed, the mode will change in the following
order:

AUTO

COOL

DRY FAN

About three seconds later, the entire display will reappear.

To Set the Thermostat

Press the SET TEMP. buttons (Fig. 6 L).

button: Press to raise the thermostat setting.

button: Press to lower the thermostat setting.

Thermostat setting range:

Cooling/Drying ........................ 64 to 88 °F
Fan ........................................... 62 to 88 °F

About three seconds later, the entire display will reappear.
NOTE:
● During Fan mode, set the unit to “– – “ for continuous fan operation regard-

less of room temperature.

The thermostat setting should be considered a standard value, and may differ
somewhat from the actual room temperature.

To Set the Fan Speed

Press the FAN CONTROL button (Fig. 6 O).

Each time the button is pressed, the fan speed changes in the following order:

AUTO

HIGH

MED

LOW

QUIET

About three seconds later, the entire display will reappear.

When set to AUTO:
Cooling
:

As the room temperature approaches that of the thermostat setting,
the fan speed becomes slower.

Fan

:

The fan will operate at the optimum speed in accordance with the
room temperature in the vicinity of the indoor unit.

When set to QUIET:
SUPER QUIET operation begins. The indoor unit’s airflow will be reduced for
quieter operation.
● SUPER QUIET operation cannot be used during Dry mode. (The same is true

when dry mode is selected during AUTO mode operation.)

● During SUPER QUIET operation, Cooling performance will be reduced some-

what.

s

s

s

Example: When set to AUTO

In order to increase the drying effect
during quiet cooling operation, the fan of
the indoor unit may stop.

OPERATION

s

s

s

s

s

s

Advertising
This manual is related to the following products: