Operating tips, En-18, Temperature and humidity range – Friedrich MW12C3E User Manual
Page 21
En-18
OPERATING TIPS
Indoor temperature
Outdoor temperature
Indoor humidity
Cooling and Dry Mode
95 °F DB / 71 °F WB
64 °F DB / 55 °F WB
115 °F DB
32 °F DB
About 80 % or less
If the unit is used for long periods under high-humidity conditions, condensation
may form on the surface of the indoor unit, and drip onto the floor or other objects
underneath.
About 50 % or less
If the unit is used for long periods under high-humidity conditions, condensation
may form on the surface of the indoor unit, and drip onto the floor or other objects
underneath.
Temperature and Humidity Range
DB : Dry Bulb Temperature
WB : Wet Bulb Temperature
● If the air conditioner is used under higher temperature conditions than those listed, the built-in protection circuit may
operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of
lower temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
● Do not use this unit for any purposes other than the Cooling, Dehumidifying, and air-circulation of rooms in ordinary
dwellings.
Maximum
Minimum
Maximum
Minimum
Outdoor
Temperature
68 °F or above
Outdoor
Temperature
below 68 °F