Friedrich MW12C3E - Manual (Page 3)

SPECIFICATIONS
MW09C3E × 2 MW12C3E × 2
MR18DC3E MR24DC3E
COOLING MODEL
230/208 V- 60 Hz
18,800/18,600 BTU/h 23,000/22,600 BTU/h
2,000/1,950 W 2,450/2,450 W
9.0/9.5 A 10.8/12.0 A
R22 1.83 × 2 Ibs. R22 2.31 × 2 Ibs.
● This specifications listed in the above table were measured under the following conditions.
● TEMPERATURE
COOLING
INDOOR 80 °F DB / 67 °F WB
OUTDOOR 95 °F DB / 75 °F WB
● Position of the AIRFLOW DIRECTION flap.
For ADJUSTING THE DIRECTION OF AIR CIRCULATION on Page En-11, use position 2.
● PIPING LENGTH 25 ft
MODELE
UNITÉ INTÉRIEURE
UNITÉ EXTÉRIEURE
TYPE
PUISSANCE
REFROIDISSEMENT
CAPACITE
ENTREE
INTENSITÉ
FRIGORIGENE
MW09C3E × 2 MW12C3E × 2
MR18DC3E MR24DC3E
MODÉLE REFROIDISSEMENT
230/208 V- 60 Hz
18.800/18.600 BTU/h 23.000/22.600 BTU/h
2.000/1.950 W 2.450/2.450 W
9,0/9,5 A 10,8/12,0 A
R22 1,83 × 2 Ibs. R22 2,31 × 2 Ibs.
● Ces spécifications figurant dans le tableau ci-dessus ont été mesurées sous les conditions suivantes.
● TEMPERATURE
REFROIDISSEMENT
INTERIEURE 80 °F DB / 67 °F WB
EXTERIEURE 95 °F DB / 75 °F WB
● Position du volet de direction de flux d’air. Pour le réglage de direction de circulation d’air à la page Fr-11, utiliser la position
2.
● LONGUEUR DE TUYAUTAG 25 ft
FICHE TECHNIQUE
MW09C3E × 2 MW12C3E × 2
MR18DC3E MR24DC3E
MODELO DE REFRIGERACIÓN
230/208 V- 60 Hz
18.800/18.600 BTU/h 23.000/22.600 BTU/h
2.000/1.950 W 2.450/2.450 W
9,0/9,5 A 10,8/12,0 A
R22 1,83 × 2 Ibs. R22 2,31 × 2 Ibs.
● Las especificaciones mencionadas en la tabla de arriba se basan en las mediciones bajo las condiciones siguientes.
● TEMPERATURA
REFRIGERACIÓN
INTERIOR 80 °F DB / 67 °F WB
EXTERIOR 95 °F DB / 75 °F WB
● Posición de la lama deflectora de la DIRRECCIÓN DEL FLUJO DE AIRE. Para el AJUSTE DE LA DIRECCIÓN DE CIRCULACIÓN
DEL AIRE de la página Sp-11, emplee la posición 2.
● LONGITUD DE LOS TUBOS 25 ft
ESPECIFICACIONES
Fig. 6
Fig. 1
Fig. 2
Fig. 5
Fig. 7
Fig. 3
Fig. 4
Fig. 8
En-1
CONTENTS
SAFETY PRECAUTIONS
WARNING!
CAUTION!
SAFETY PRECAUTIONS .................................... En-1
FEATURES AND FUNCTIONS ........................... En-4
NAME OF PARTS ................................................ En-5
PREPARATION .................................................... En-6
OPERATION ........................................................ En-7
TIMER OPERATION ............................................ En-9
SLEEP TIMER OPERATION .............................. En-10
ADJUSTING THE DIRECTION OF
AIR CIRCULATION ............................................ En-11
SWING OPERATION ......................................... En-12
MANUAL AUTO OPERATION .......................... En-12
CLEANING AND CARE ..................................... En-13
TROUBLESHOOTING ....................................... En-16
OPERATING TIPS .............................................. En-17
This mark indicates procedures which, if improperly performed, might lead to the
death or serious injury of the user.
This mark indicates procedures which, if improperly performed, might possibly result
in personal harm to the user, or damage to property.
Safety Symbols
The triangular symbol indicates DANGER, WARNING and CAUTION items.
This symbol indicates prohibited operations. The prohibited action is indicated both within the symbol,
and in nearby explanations.
● This symbol indicates instructions regarding operations which are to be performed by the user.
● Before using the appliance, read these “SAFETY PRECAUTIONS” thoroughly and operate in the correct way.
● The instructions in this section all relate to safety; be sure to maintain save operating conditions.
● “WARNING” and “CAUTION” have the following meanings in these instructions:
WARNING!
Do not attempt to install this air conditioner by yourself.
● Consult authorized service personnel for all installations.
Consult authorized service personnel for any repairs.
● Do not attempt to remove parts, or service the unit yourself, since you may be
exposed to dangerous electrical shock. This appliance contains no user-service-
able parts.
When moving, consult authorized service personnel for discon-
nection and installation of the unit.