Troubleshooting, En-16, Warning – Friedrich MW12C3E User Manual

Page 19

Advertising
background image

En-16

TROUBLESHOOTING

In the event of a malfunction (burning smell, etc.), immediately stop operation, disconnect the
Power and consult authorized service personnel.
Merely turning off the unit’s power switch will not completely disconnect the unit from the power
source. Always be sure to disconnect the Power Supply Plug and turn off your circuit breaker to
ensure that power is completely off.

Before requesting service, perform the following checks:

WARNING!

Symptom

Doesn’t operate immedi-
ately:

Noise is heard:

Smells:

Mist or steam are
emitted:

Airflow is weak or stops:

Problem

● If the unit is stopped and then immediately started again, the com-

pressor will not operate for about 3 minutes, in order to prevent
fuse blowouts.

● Whenever the Power is disconnected and then reconnected to a

power outlet, the protection circuit will operate for about 3 min-
utes, preventing unit operation during that period.

● During operation and immediately after stopping the unit, the

sound of water flowing in the air conditioner’s piping may be
heard. Also, noise may be particularly noticeable for about 2 to 3
minutes after starting operation (sound of coolant flowing).

● During operation, a slight squeaking sound may be heard. This is

the result of minute expansion and contraction of the front cover
due to temperature changes.

● Some smell may be emitted from the indoor unit. This smell is

the result of room smells (furniture, tobacco, etc.) which have
been taken into the air conditioner.

● During Cooling or Dry operation, a thin mist may be seen emitted

from the indoor unit. This results from the sudden Cooling of
room air by the air emitted from the air conditioner, resulting in
condensation and misting.

● The fan may operate at very low speed during Dry operation or

when the unit is monitoring the room’s temperature.

● During SUPER QUIET operation, the fan will operate at very low speed.

● In the monitor AUTO operation, the fan will operate at very low speed.

NORMAL

FUNCTION

See Page

7

7

7

Advertising
This manual is related to the following products: