Furuno NX-700B - Manual (Page 34)

2. OPERATION
2-14
Editing NAVTEX station
Existing NAVTEX station may be edited as follows:
1. Press the MENU/ESC key to show the main menu.
2. Press ▲ or ▼ to choose Service, and then press the ENT key.
3. Press ▲ or ▼ to choose Edit Station List, and then press the ENT key.
4. Press ◄ or ► to choose the NAV area to be changed (01 to 16, EXT).
5. Press the LIST key to choose the frequency to be changed (518kHz, 490kHz
or 4209.5kHz).
6. Press ▲ or ▼ to choose the station, and then press the ENT key.
Edit
Delete
7. Press ▲ to choose “Edit”, and then press ENT key to show the edit window
appears.
Oostende
NavArea 1
Station Oostende
Latitude 51 11'N
Longitude
2 48'E
518kHz ID1: T ID2: - ID3: -
490kHz ID1: - ID2: - ID3: -
4209.5kHz ID1: A ID2: - ID3: -
Range 55nm
Save data ?
Station Name
NAV Area
Latitude
Longitude
Station ID
Service Area
Edit window (Ex. NAVTEX station Oostende)
8. Edit data as appropriate.
9. Confirm that Save station? is chosen, and then press the ENT key.
10. Press ◄ to choose “YES”, and then press the ENT key to erase the edit
window.
11. Press the MENU/ESC key several times to close the menu.
Deleting NAVTEX stations
You may delete unnecessary NAVTEX stations as follows:
1. Press the MENU/ESC key to show the main menu.
2. Press ▲ or ▼ to choose Service, and then press the ENT key.
3. Press ▲ or ▼ to choose Edit Station List, and then press the ENT key.
4. Press ◄ or ► to choose the NAV area to be deleted. (01 to 16, EXT).
5. Press the LIST key to choose the frequency to be deleted (518kHz, 490kHz
or 4209.5kHz).
6. Press ▲ or ▼ to choose the station name to be deleted, and then press ENT
key.
The item window appears.