Furuno NX-700B - Manual (Page 32)

2. OPERATION
2-12
2.13 Editing the NAVTEX Station List
Maximum 300 NAVTEX stations can be registered into the memory.
Note:
To cancel editing of a NAVTEX station, press the MENU/ESC key. The
message “Exit without saving?” appears. Choose “Yes”, and then press
ENT
key.
Adding NAVTEX station
You may add a NAVTEX station to the NAVTEX station list as follows:
1. Press the MENU/ESC key to show the main menu.
2. Press ▲ or ▼ to choose Service, and then press the ENT key.
Service
INS Input Speed 4800bps
INS Output Speed 4800bps
Print Header On
Edit Station List
Default Setting
Test
Rcv Monitor
Service menu
3. Press ▲ or ▼ to choose Edit Station List, and then press the ENT key.
518kHz
NavArea 01
[ New ]
Oostende T, - , -
Tallinn U, - , -
Reykjavik Radio R, - , -
Valentia W,- , -
Malin Head Q, - , -
Niton K, - , -
Den Helder P, - , -
Bodo Radio B, - , -
Rogaland Radio L, - , -
Vardoe Radio V, - , -
Svalbard A, - , -
[ ][ ] CHANGE NAVAREA
[LIST] CHANGE FREQ
[ENT] EDIT [MENU] RETURN TO MENU
Station name
NAV Area
Frequency
Edit station list display
4. Confirm that New is chosen, and then press the ENT key to show the
addition window appears.