Furuno BB FAR28x7 - Manual (Page 210)

5. VIDEO PLOTTER OPERATION
5-16
5.10 Marks and Lines
You can inscribe marks on the display to denote important points, for example, a
buoy or a wreck. The memory for marks, lines and own ship’s track is 6,000
points.
5.10.1 Inscribing marks and lines
1. Roll the trackball to choose the MARK box at the left side of the screen.
MARK >
Mark type
-> +
162.5 ° T 11.7 NM
Bearing and range from
own ship to mark
Mark box
2. Push the right button to open the MARK menu.
[MARK MENU]
1 ORIGIN MARK STAB
GND/SEA
2 MARK KIND
ORIGIN MARK(No. )/
ORIGIN MARK(SYM)/
MAP MARK/
WP 1~50/
WP 51~ 100/
WP 101~150/
WP 151~ 200/
OWN SHIP SHAPE
8 MARK POSN
CURSOR/OS/L/L
00°000.00 N
000°000.00 E
9 MAP DISPLAY
OFF/ON
0 MAP MARK COLOR*
RED/GRN/BLU/YEL/
CYA/MAG/WHT
* Not available on IMO
or A type
MARK menu
3. Roll the wheel to choose 2 MARK KIND and then push the wheel or the left
button.
4. Roll the wheel to choose MAP MARK and then push the wheel or the left
button.
Note: For other than IMO- and A-type radars you may choose mark color at
0 MAP MARK COLOR.
5. Push the right button to close the menu. The guidance box now reads
“MARK SELECT / MARK MENU.”