Furuno BB FAR28x7 - Manual (Page 222)

5. VIDEO PLOTTER OPERATION
5-28
5.13.2 Editing nav lines
Follow the procedure below to edit a nav line. Before editing a nav line it must be
disabled. See paragraph 5.13.6.
1. Roll the trackball to choose the MENU box and then push the left button.
2. Roll the wheel to choose 8 [NAV LINE•WPT] and then push the wheel or the
left button.
3. Roll the wheel to choose 8 [NAV LINE SET] and then push the wheel or the
left button.
4. Roll the wheel to choose 2 NAV LINE NO. SELECT and then push the wheel
or the left button.
5. Use the wheel to enter nav line number to edit and then push the wheel or
the left button.
6. To edit nav line name, roll the wheel to choose 3 NAV LINE NAME and then
push the wheel or the left button. Use the wheel to change name.
7. To replace waypoints in a nav line, do the following:
1) Roll the wheel to choose 4 [NAV DATA ENTRY] and then push the wheel or
the left button.
2) Roll the wheel to choose 2 NAV LINE WPT and then push the wheel or the
left button.
3) Push the wheel to choose the waypoint you wish to replace.
4) Roll the wheel to set new waypoint number.
5) Push the wheel to finish.
8. Push the right button several times to close the menu.