Furuno BB FAR28x7 - Manual (Page 247)

6. MAINTENANCE, TROUBLESHOOTING
6-13
System messages (con’t from previous page)
Message Alarm Meaning
Other Alarms
CHK INT-SW
Continuous Image from currently selected antenna becomes lost
DEPTH Continuous Water is shallower than preset depth
HEADING SET None Gyro re-set with MODE key
MEMORY FULL Continuous
XTE Continuous Cross-track error: Ship has crossed over a nav line by a
preset range
WATCH Continuous Watchman time has elapsed
ARRIVAL Continuous Ship has arrived to a waypoint
KEY Continuous No status data from keyboard
RF Continuous No status data from antenna
EXT-ERROR Continuous An alarm among GYRO, TRIGGER, VIDEO, AZIMUTH
and HEADLINE has been generated at a radar
interfaced via the interswitch.
Work in Progress
TUNE
INITIALIZE
None Tune initialization in progress
PM None Performance monitor is in use
USER DEFAULT None
SART None Radar is set up for SART detection
WR CARD DATA None Writing memory card
RD CARD DATA None Reading memory card
FORMAT CARD None Formatting memory card
DELETE CARD
DATA None Deleting file from memory card
POWER ON
RESTART None Prompt which appears after loading installation settings
from memory card.