Operating instructions, Cycle selection, Warning – FRIGIDAIRE 137181900A User Manual

Page 8

Advertising
background image

8

operatInG InStructIonS

Turn the cycle selector in either direction to the cycle

desired. The indicator for that cycle will be illuminated.

To change the cycle once it has begun, press the cancel

button before selecting a new cycle. Just turning the

cycle selector knob to another selection will not change

the cycle. If the selection is changed after the cycle

starts, the indicator lights will blink, the signal will beep

and “

Err” will be displayed. The signal will beep and the

status lights will flash, but the original cycle will continue.

auto Dry cycles

Auto Dry cycles take the guesswork out of selecting the

correct drying time for each load. Moisture sensing bars

at the back of the dryer drum sense the moisture level of

the load as it tumbles through the heated air. With Auto

Dry cycles, the load will automatically be dried at the

selected temperature to the desired dryness level. Auto

Dry cycles save time and energy and protect fabrics.
The estimated drying time will be displayed for about 5

minutes. Then the outside of the display will light up in a

circular track to indicate the drying time is automatically

being determined by the sensors. When the load has

reached the selected dryness level, it will continue to

tumble during a cool down period. This helps reduce

wrinkling and makes items easier to handle during

unloading.

cycle Selection

Drying time varies depending on size and dampness of

load and fabric type. If the load is too small or almost

dry, the moisture sensing bars may not detect enough

moisture to continue the cycle and the cycle may end

after a few minutes. If this occurs, select a Timed Dry

cycle.
Room temperature and humidity, type of installation and

electrical voltage or gas pressure can also affect drying

time.

towels/Bedding

Select this Auto Dry cycle for towel loads.
Heavy

Select this Auto Dry cycle for sturdy work clothes.
normal

Select this Auto Dry cycle for cotton items.
casual

Select this Auto Dry cycle for cottons and blends with a

no-iron finish.
Delicates

Select this Auto Dry cycle for knits and delicate items.

timed Dry cycles

Quick

Select this timed cycle to quickly dry small loads in 25

minutes.
timed Dry

To manually select the drying time for any load, turn

the knob to Timed Dry. Drying times from 15 to 90

minutes can be selected by continuing to turn the

knob. Drying time will be displayed. You will not be able

to select a Dryness level.

This manual covers many models and not all cycles, options, or features listed are available

on every model. Console shown above for reference only. Your model may differ.

Follow the fabric care label instructions

on items to be dried.

for best results

WarnInG

fIre HaZarD

To avoid fire hazard, do not use heat to dry items

containing feathers or down, foam rubber, plastics

similarly textured, rubber-like materials. Use the Timed

Dry cycle and the Air Fluff/No Heat setting.

Advertising