Frymaster FOOTPRINT E4 - Manual (Page 80)

2-39
2.7 Frypot Assemblies and Associated Parts cont.
ITEM PART # COMPONENT
1 Frypot Assembly
(does not include Item 6)
2 823-5545SP Frypot, Full-Vat Filter with Insulation
(for use on EPRI units)
3 823-5359SP Frypot, Full-Vat Filter w/o Insulation
(for use on Standard units)
823-5996 Frypot, Half-Vat Filter w/o Insulation LH
(for use on Fryer ½ LH units)
823-5723 Frypot, Half-Vat Filter w/o Insulation RH
(for use on Fryer ½ RH units)
823-5783 Frypot, Full-Vat Filter w/o Insulation Deep Cabinet
(for use on Standard Deep units)
4 823-5551SP Frypot, Dual-Vat Filter with Insulation
(for use on EPRI units)
5 823-5482SP Frypot, Dual-Vat Filter w/o Insulation
(for use on Standard units)
√ 6 Thermostat Assembly, High-Limit
826-2454 Non-CE Full Vat 425°F (218°C) (17kW FV and 14kW FV) (Color-Coded
Black 806-7543)
826-2456 Non-CE Dual Vat 435°F (224°C) (22kW, 17kW DV and 14 kW DV) (Color-
Coded Red 806-8035)
826-2455 CE 415°F (213°C) (14kW and 17kW CE) (Color-Coded Yellow 806-8132)
826-2457 CE 405°F (207°C) (22 kW FV and DV CE) (Color-Coded White 806-8536)
7 812-0211 Insulation, Kaowool 17-inch X 10-inch X ½-inch (4 required per pot)
8 900-4100 Retainer, Side Insulation
9 900-4101 Retainer, Front Insulation
10 900-1345 Retainer, Rear Insulation
11 826-1376 Nut, 10-32 Keps Hex (Pkg. of 10)
NOTES: The frypots for EPRI-equipped units are insulated; those for non-EPRI (standard) units are
not. EPRI frypot assemblies 806-5545SP and 806-5551SP consist of Items 2 and 4 respectively, plus
insulation (Items 7-10). When replacing insulation or adding insulation to a bare frypot, the individual
pieces (sides, front, and back) are cut to fit from Item 7 when installed. Each frypot requires four uncut
pieces of insulation.
√ Recommended parts.