Freecom Technologies Network hard drive - Manual (Page 20)

Freecom Classic SL Network Drive
GB
7
20
Chapter 7: Drive Functions
Click "Classic SL Network Drive Administrator Tool" and place the cursor on a
Classic SL Network Drive to view its functions.
-
Disable - Disables writing to and reading from the Classic SL Network Drive.
NOTE: If the Classic SL Network Drive is being used by any
application, it will not disable. Wait until all applications using
the Classic SL Network Drive have finished. Then try disabling it
again. If you still cannot disable after several attempts, restart
your computer. This may occur when unknown programs in the
background are still using Classic SL Network Drive.
- Edit Name – Updates/Changes the name of the Classic SL Network Drive.
- Type in the new name for the Classic SL Network Drive on "Edit a Classic SL
Network Drive" window then click "OK". If you do not want to change the
name of the Classic SL Network Drive, click "Cancel".
- Enable Read Only – Enables Read Only Mode.
- Enable Read/Write – Enables Read / Write Mode.
- Property – Displays the properties of the Classic SL Network Drive.
- Refresh – Updates the Network Drive’s data from which you are reading.
- Remove – Removes the Classic SL Network Drive from your computer.