FujiFilm FinePix 3800 - Manual (Page 35)

69
4
68
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
xD-Picture Card. The recorded specifications include information on which frames are to
be printed.
This section gives a detailed description of how to order your prints with the FinePix 3800.
On the FinePix 3800, you can specify only one print per image in the DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
©
ø
( ➡P.63)
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥
(
➡P.73)
If you load an xD-Picture Card that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
™
( ➡P.124)
Up to 999 frames can be specified on the same xD-Picture Card.
i HOW TO SPECIFY PRINT OPTIONS (DPOF)
w PLAYBACK MENU
Protect all
Press the “MENU/OK” button to protect all the
files. Press the “MENU/OK” button to unprotect all the
files.
Unprotect all
k PROTECTING IMAGES FRAME/ALL w PLAYBACK MENU
●
! To interrupt the procedure before it is completed,
press the “BACK” button.
●
! To interrupt the procedure before it is completed,
press the “BACK” button.