Troubleshooting, Warning displays – FujiFilm FinePix 3800 User Manual

Page 63

Advertising
background image

125

124

Troubleshooting

e If you think the camera is faulty, check the following once more.

Troubleshooting

Possible causes

Solutions

No power.

i The batteries are exhausted.
i The AC power adapter plug has come out of

the power outlet.

i The batteries are loaded the wrong way round.

i Load new fully charged batteries.
i Plug the adapter back in.

i Load the batteries in the correct direction.

Power cuts out during
operation.

The batteries are exhausted.

Load new fully charged batteries.

Batteries runs out quickly.

i Camera is being used in extremely cold

conditions.

i The terminals are soiled.

i The batteries have reached the end of their

operating lives.

i Put the batteries in your pocket or another

warm place to heat them and then load them
into the camera just before you take a picture.

i Wipe the battery terminals with a clean, dry

cloth.

i Load new fully charged batteries.

No photograph is taken
when the shutter button is
pressed.

i No xD-Picture Card is loaded.
i The xD-Picture Card is fully recorded.

i The xD-Picture Card is write-protected.
i The xD-Picture Card is not formatted.
i The xD-Picture Card contact area (gold-

colored area) is soiled.

i The xD-Picture Card is damaged.
i The Power Save function has switched the

camera off.

i The batteries are exhausted.

i Load an xD-Picture Card.
i Insert a new xD-Picture Card or erase some

unwanted frames.

i Remove the write-protection.
i Format the xD-Picture Card.
i Wipe the xD-Picture Card contact area

(gold-colored area) with a clean dry cloth.

i Load a new xD-Picture Card.
i Switch the camera on.

i Load new fully charged batteries.

Prints were specified for more than 1000 frames
in the DPOF frame settings.

The maximum number of frames for which
prints can be specified on the same xD-Picture
Card is 999.
Copy the images for which you want to order
prints onto another xD-Picture Card and then
specify the DPOF settings.

Camera malfunction or fault.

i Switch the camera on again, taking care not to

touch the lens.

i Switch the camera off and on again.

Warning Displayed

Explanation

Remedy

Warning Displays

Advertising