FujiFilm FinePix 3800 - Manual (Page 41)

81
5
80
■ SET–UP Menu Options (Date/time setting, etc.)
Settings Display Explanation
POSTVIEW
USB MODE
POWER SAVE
DATE/TIME
ON/OFF
DSC/PC CAM
ON/OFF
SET
This option specifies whether or not an image checking screen (photography
results) is displayed after you take a shot.
The photography results are displayed for about 2 seconds and then
automatically recorded.
In continuous shooting, the photography results are displayed for a set time
before being automatically recorded even if this option is set to “OFF”.
See P.96 for details.
This function temporarily switches the screen off if the camera is not used for
approximately 30 seconds. See P.82 for details.
Use this option to correct the date or time. See P.20 for details.
Factory
default
ON
DSC
OFF
—
SOUND LOW/HIGH/OFF
This option allows you to set the volume of the beep emitted when the camera
controls are used.
LOW
RESET ALL OK
Except for the DATE/TIME and LANGUAGE settings, this function resets all the
camera settings (including the photography and playback menu settings) to the
factory default values set at shipment. When you press “c”, a confirmation
screen appears. To proceed, press the “MENU/OK” button again.
—
LANGUAGE
ENGLISH/FRANCAIS/
DEUTSCH
Select English, French or German as the language used for screen display. ENGLISH
■ List of settings
—
BRIGHTNESS (
➡P.79)
SET–UP
q Still Image mode
—
BRIGHTNESS (
➡P.79)
SET–UP
T Movie mode
VOLUME ( ➡P.79)
BRIGHTNESS ( ➡P.79)
SET–UP
w Playback mode
1Press “a” or “b” to select a menu option and
then press “d” or “c” to change the setting.
2Press the “MENU/OK” button.
You can use “SET–UP” in any mode.
1Press the “MENU/OK” button to display the
menu screen.
2Press “d” or “c” to select “ g ” OPTION and
then press “a” or “b” to select “SET–UP”.
3Press the “MENU/OK” button.
●
! Press “c” for “DATE/TIME” or “RESET ALL”.
2 1 0 1
0 2 0 1
0 2 0 3
g USING SET– UP
Still Photography
Screen