FujiFilm FinePix 3800 - Manual (Page 37)

73
4
72
Pressing the “MENU/OK” button confirms the
DPOF settings.
Pressing the “BACK” button returns you to the
settings screen
. 5
7
Pressing the “MENU/OK” button confirms all the
settings.
If you select a frame for which DPOF settings have
already been specified, the “
¥
”
message appears.
Pressing the “MENU/OK” button erases all of
the DPOF settings already specified for each
frame. You must then specify the DPOF setting
for each frame again.
● ! Press the “BACK” button to leave the previous
settings unchanged.
●
! During playback, check that the “i ” icon is
displayed for the previous settings.
i DPOF SET FRAME
w PLAYBACK MENU
3 5 0 1 0 2
6
1 Use “d” or “c” to display the frame for which
you want to specify DPOF settings.
2 Press “a” or “b” to set “YES” for the frame to
be printed and then press the “MENU/OK”
button or “c”.
To specify more DPOF settings, repeat steps 1
and 2.
● ! DPOF settings cannot be specified for movies.
●
! “TOTAL” shows the total number of frames for which
prints have been ordered.
When you have finished the settings, always
select “FINISH” and press the “MENU/OK”
button.
If you press the “BACK” button, no DPOF settings
are specified.
●
! You can only specify one print per frame in the DPOF
settings. Note also that you can specify prints for up
to 999 frames on the same xD-Picture Card.
◆
Individual DPOF settings cannot be
changed.
◆