FUJITSU DESKPOWER 6000 - Manual (Page 103)

93
Appendix
○ ○ ○ ○ ○ ○
Supporting power saving on a display
● For Windows 95 models:
To use a display non-supporting the power saving function, open “Display Detailed
Properties” on the “Screen Properties” and check off the “Power Saving Display” with the
“Monitor” tab.
● Windows 98 models:
To use a display non-supporting the power saving function, set “None” to both “System
Standby” and “Turning off the Monitor” in the “Power Supply Control Properties”.
○ ○ ○ ○ ○ ○
Suspend functions (Windows 95 models)
To use the suspend function, install the display driver from the device driver CD included.
○ ○ ○ ○ ○ ○
Power saving function
If the power saving function operates when using the following files, the application
operation becomes unstable. To use the following, disable the power saving function.
-
Each file in the Wave/AFI/MPEG/DAT format
- Music CD
○ ○ ○ ○ ○ ○
Replacing a display
When replacing a display with a display having different specifications (particularly liquid-
crystal display), a display error (such as no image on the screen) may occur.
When replacing a display, reset the settings of the resolution and refresh rate to the
factory-set settings.
- Resolution : 800 x 600
- Refresh rate : Optimum (Windows 95/98 models) or 60 Hz (Windows NT models)
If no image is displayed on the screen or a resolution that cannot be displayed is found by
replacing a display without setting the above, reinstall the display driver as follows.
1
Start Windows in the Safe Mode.
2
Set the Graphic adapter to “Standard VGA,” then restart the system.
3
Reinstall the display driver.