FUJITSU DESKPOWER 6000 - Manual (Page 74)

64
● L2 Cache
Displays the size of the CPU secondary cache memory.
● Total Memory
Displays the total memory size (RAM) mounted on the computer.
– Memory Slot 1/2
Detects and displays the type of memory mounted on each memory slot. A slot with no
memory mounted is indicated as “Not used.”
● ECC
This item sets whether to perform memory error check (ECC mode).
- Disabled
Memory check is disabled.
- Error correction enabled (Initial value)
The system detects for a 2-bit error on memory and corrects a 1-bit error on memory in
ECC mode.
- Error detection enabled
The system checks for memory errors but does not correct errors.
● Asset Number
Displays an asset number. If no asset is set, “None” is displayed.
The asset number is stored in a 64-byte data area but is displayed using only 30
characters.
If more than 30 characters are used, the number is displayed with an angle (
→
) on the end
indicating that it continues. The asset number can only be ASCII codes 20h to 7Eh. Other
characters are displayed as “?”
Point