FUJITSU DESKPOWER 6000 - Manual (Page 57)

47
4
Security Menu
The Security menu is used to set up the PC such that it is accessible to specific users only.
Select Security with the
←
or
→
key to display the Security menu.
- Before setting passwords, set the password jumper on the mother board to Enabled,
otherwise the Security menu items may not be concealed.
○ ○ ○ ○ ○ ○
Details on setup items
● Supervisor Password
This item displays the status of the supervisor password.
- Clear
No password is set.
- Set
A password is set.
- Disabled
The password jumper is set to Disabled and passwords are disabled.
F1 Help
↑↓
Select Item -/Space Change Value F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select : Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Info Exit
Supervisor Password Is: Clear
User Password Is: Clear
Set Supervisor Password [ Enter ]
Set User Password [Enter]
Set User Password Length [16]
Password on Boot: [Disabled]
Power on Wake up: [Disabled]
Boot from CD-ROM: [All]
Floppy Disk Access: [All]
Hard Disk Boot Sector: [Normal]
Item Specific Help
Press <Enter> Key to
set Supervisor
Pasword to enable any
password features.
Then password entry
is required to enter
BIOS Setup.
Point