FUJITSU DESKPOWER 6000 - Manual (Page 70)

60
Boot Menu
The Boot menu is used to set the priority of boot drives.
Select Boot using the
←
or
→
key to display the Boot menu.
○ ○ ○ ○ ○ ○
Details on setup items
● Quick Boot
This item sets whether to reduce the time after the personal computer is turned on or
rebooted until the OS is loaded.
- Disabled
The time to load the OS is not reduced.
- Enabled (Initial value)
The time to load the OS is reduced.
If an error occurs in POST at boot, quick boot is not performed at next boot.
F1 Help
↑↓
Select Item -/Space Change Value F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select : Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Info Exit
QuickBoot: [ Enabled ]
Boot-time Diagnostic Screen: [Disabled]
Preboot Execution Environment: [Disabled]
Delay Time for ATA/ATAPI Drive: [3 seconds]
: Boot Device Priority
Item Specific Help
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
[Disabled]
All diagnostic tests
will be done.
[Auto]
Diagnostic tests will
be automatically
skipped or done
according to the
order of the ACPI OS.
Point