Furuno 1834C-BB - Manual (Page 223)

SP - 4
5 PLOTTER FUNCTION
5.1 Projection Mercator
5.2 Usable Area 85 latitude or below
5.3 Effective Area 211.2 x 158.4 mm
5.4 Display pixels 640 x 480 dots
5.5 Position Indication Latitude/longitude, Loran C LOP or DECCA LOP
5.6 Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area)
5.7 Track Display
Plot interval: by time (1 sec. to 99 min. 59 sec.) or
by distance (0 to 99.9 nm)
5.8 Colors Red, yellow, green purple, light-blue, blue, white
5.9 Memory Capacity Track/mark: 8000 points, Waypoint: 999 points
5.10 Storage Capacity Simple route: 200 routes with 35 waypoints each
6 POWER
SUPPLY
6.1 Rated Voltage/Current
M1824C-BB 12-24 VDC: 5.5-2.7 A
M1834C-BB 12-24 VDC: 5.3-2.6 A
M1934C-BB (24rpm) 12-24 VDC: 5.6-2.7 A
M1934C-BB (48rpm) 12-24 VDC: 7.5-3.6 A
M1944C-BB (24rpm) 12-24 VDC: 6.3-3.1 A
M1944C-BB (48rpm) 12-24 VDC: 8.1-3.8 A
M1954C-BB (24rpm) 12-24 VDC: 8.6-4.3 A
M1954C-BB (48rpm) 12-24 VDC: 10.3-5.1 A
M1964C-BB (24rpm) 12-24 VDC: 10.1-5.0 A
M1964C-BB (48rpm) 12-24 VDC: 11.6-5.6 A
6.2 Rectifier (option) 100-115/220-230 VAC, 1 phase, 50/60 Hz
7 ENVIRONMENTAL
CONDITION
7.1 Ambient Temperature Antenna Unit: -25°C to +70°C
Processor Unit and Control Unit: -15°C to +55°C
Power Supply Unit: -15°C to +55°C
7.2 Relative Humidity 93 % or less at +40°C
7.3 Waterproofing Antenna Unit: IPX6
Control Unit: IPX5 (Front panel), IPX2 (Rear panel)
Processor Unit, Power Supply Unit: IPX0
7.4 Vibration IEC 60945-4 th - 2 Hz-5Hz and up to 13.2 Hz with an excursion of ±1 mm ±10%
(7 m/s 2 maximum acceleration at 13.2 Hz);
- above 13.2 Hz and up to 100 Hz with a constant maximum
acceleration of 7 m/s 2 .