Furuno 1834C-BB - Manual (Page 92)

3. PLOTTER OPERATION
3-29
Entering a waypoint from the waypoint list
You can manually enter waypoint position from the waypoint list as follows:
1. Press the MENU key to open the menu.
2. Press the C: WAYPOINTS/ROUTES and A: WAYPOINTS soft keys.
3. Press A: LOCAL LIST soft key (lists waypoints in order from nearest to furthest,
maximum 32 points) or B: ALPHANUMERIC LIST (lists waypoints in ALPHANUMERIC
order) soft key.
Alphanumeric waypoint list Local waypoint list
WPT
ALPHA
PUSH ENTER KNOB TO
SEARCH FOR
- --
▲
ABALONE
35 ° 47.010'N
135 ° 21.000'W
00:00 01JAN01
BRG 350.9 °
RNG 3.80nm
CRAB
34 ° 42.000'N
135 ° 21.050'W
00:00 01JAN01
BRG 050.9 °
RNG 1.98nm
FISH
34 ° 41.000'N
135 ° 21.030'W
00:00 01JAN01
BRG 065.9 °
RNG 1.83nm
LOBSTER
38 ° 44.300'N
135 ° 21.010'W
00:00 01JAN01
BRG 144.9 °
RNG 4.93nm
WPT
LOCAL
▲
ABALONE
35 ° 47.010'N
135 ° 21.000'W
00:00 01JAN01
BRG 350.9 °
RNG 3.80nm
CRAB
34 ° 42.000'N
135 ° 21.050'W
00:00 01JAN01
BRG 050.9 °
RNG 1.98nm
FISH
34 ° 41.000'N
135 ° 21.030'W
00:00 01JAN01
BRG 065.9 °
RNG 1.83nm
LOBSTER
38 ° 44.300'N
135 ° 21.010'W
00:00 01JAN01
BRG 144.9 °
RNG 4.93nm
NEW
WPT
B
RETURN E
GOTO A
EDIT
WPT
C
ERASE
WPT
D
NEW
WPT
B
RETURN E
GOTO A
EDIT
WPT
C
ERASE
WPT
D
Alphanumeric and local waypoint lists
4. Press the B: NEW WPT soft key to show the waypoint window (see the figure on the
previous page). Own ship position is shown in the position box.
5. Select the position box and enter position desired.
6. If desired, change waypoint data following the instructions from step 6 in “Editing a
waypoint from the plotter display” on page 3-30.
7. Press the D: SAVE soft key to register the waypoint.
8. Press the MENU key to close the menu.
3.8.2 Editing waypoint data
Waypoint data may be edited from the waypoint list or directly from the plotter display.
Editing waypoint data from the waypoint list
1. Press the MENU key to open the menu.
2. Press the C: WAYPOINTS/ROUTES and A: WAYPOINTS soft keys.
3. Press the A: LOCAL LIST or B: ALPHANUMERIC LIST soft key as appropriate.
4. Use the Trackball to select the waypoint you want to edit.
5. Press the C: EDIT WPT soft key.
6. Edit data as appropriate.
7. Press the D: SAVE soft key.
8. Press the MENU key to close the menu.