Furuno 1834C-BB User Manual
Page 94
3. PLOTTER OPERATION
3-31
Erasing a waypoint from the menu
1. Press the MENU key followed by the C: WAYPOINTS/ROUTES and A: WAYPOINTS
soft key to open the waypoint menu.
2. Press the C: WAYPOINT BY CURSOR soft key.
3. Operate the Trackball to place the cursor on the waypoint which you want to erase. A
flashing diamond mark appears on the waypoint when it is correctly selected.
4. Press the D: EDIT/MOVE soft key followed by the D: ERASE WPT soft key. You are
asked if you are sure to erase the waypoint.
5. Push the ENTER knob to erase the waypoint.
6. Press the MENU key to close the menu. The waypoint is erased from the plotter screen
and the waypoint list.
Erasing a waypoint from the waypoint list
1. Press the MENU key to open the menu.
2. Press the C: WAYPOINTS/ROUTES and A: WAYPOINTS soft keys.
3. Press the A: LOCAL LIST or B: ALPHANUMERIC LIST soft key.
4. Use the Trackball to select the waypoint you want to erase.
5. Press the D: ERASE WPT soft key. You are asked if you are sure to erase the waypoint.
6. Push the ENTER knob. The waypoint is erased from both the waypoint list and the
plotter screen (if it is currently displayed).
7. Press the MENU key to close the menu.
3.8.4 Changing waypoint mark size (Navionics GOLD charts)
You may change the size of all waypoint marks to small or large (default), or you may turn
them off.
1. Press the MENU key to open the menu.
2. Press the A: CHART SETUP and C: CHART CONFIGURATION soft keys.
CHART
CONFIG
LAT/LON GRID
GREEN
TEXT INFORMATION
ON
WAYPOINTS
LARGE
WAYPOINT NAMES
ON
CHART BORDER LINES
ON
LANDMASS
BRT YELLOW
BACKGROUND
BLACK
NAVAIDS
ON
LIGHT SECTOR INFO
ON
OTHER SYMBOLS
WHITE
MARK SIZE
LARGE
RETURN
E
CNTOUR
LINE
B
EDIT
A
Chart configuration menu
3. Use the Trackball to select WAYPOINTS.
4. Press the A: EDIT soft key.