Fujitsu Siemens Computers lifebook S6010 - Manual (Page 23)

23
Table 14: Fields, Options and Defaults for the Security Menu
Menu Field Options Default Description
Supervisor
Password is: –— Clear A display-only field. Set is displayed when the system Supervisor
Password is set and Clear when it is not.
User Password is: –— Clear A display-only field. Set is displayed when the general User Password is
set, and Clear when it is not.
Set Supervisor
Password [Enter] [Enter] Sets, changes or cancels Supervisor Password. The Supervisor Password
may be up to seven characters long and include only letters or numbers
(no symbols). Passwords are NOT case- sensitive. To cancel a password
press the Enter key instead of entering characters in the Enter New Pass-
word field and in the Re-enter New Password field. When a Supervisor
Password is set it must be used to access the BIOS setup utility.
Set User Password [Enter] [Enter] This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. The User Password may be up to
seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press
the Enter key instead of entering characters in the Enter New Password
field and in the Re-enter New Password field. When a User Password is
set it must be used to access the BIOS setup utility.
Minimum User
Password Length: [0] [0] Sets the minimum length for User Password.
Password on Boot: ■ Disabled
■ First Boot
■ Every Boot
[Disabled] When Enabled, a password (User or Supervisor) is required after the
Power On Self Test (POST) before the operating system will be read from
a disk. When set to Disabled no password is required. If no Supervisor
Password is set this feature is not available and no password is required.
KB Lock on
Resume: ■ Disabled
■ Enabled
[Disabled] When set to Enabled, the PS/2 keyboard and mouse inputs are locked
out upon unattended boot via LAN until the password is entered. When
both passwords are set, the User password is always used to lock. Pass-
word entry before OS boot is disabled upon unattended boot.
Boot from
Removable Media: ■ All
■ Supervisor only
[All] Enable password allows supervisor access only.
Floppy Disk
Access: ■ All
■ Supervisor only
[All] Enable password allows supervisor access only.
Hard Disk Security: –— –— Configures hard disk security features.
Owner
Information: –— –— Sets Owner information.
Hard Disk Boot
Sector: ■ Normal
■ Write Protected
[Normal] Sets protection mode for hard disk drive.
Security Panel On
Reume ■ Disabled
■ Enabled
[Enabled] Allows the Security Panel Feature to be enabled or disabled upon
Suspend from Resume.
S e c u r i t y M e n u
Laurel BIOS.fm Page 23 Thursday, May 23, 2002 10:05 AM