Fujitsu Siemens Computers lifebook S6010 - Manual (Page 3)

3
2. If an error message is displayed on the screen, and
you want to continue with the boot process and start
the operating system anyway, press the [F1] key.
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
P O I N T S
■ If your notebook beeps a series of beeps that sounds
like a code and the display is blank, please refer to the
Troubleshooting Section. The Troubleshooting Section
includes a list of error messages and their meanings.
■ If your data security settings require it, you may be
asked for a password before the operating system will
be opened.
M a i n M e n u
Laurel BIOS.fm Page 3 Thursday, May 23, 2002 10:05 AM