Fujitsu Siemens Computers lifebook S6010 - Manual (Page 27)

27
Table 17: Fields, Options and Defaults for the Power Menu
Menu field Options Default Description
Power Savings: ■ Disabled
■ Customized
■ Maximum
Power Savings
■ Maximum
Performance
[Customized] Sets the power savings parameters to a factory installed combination of
parameters, a custom set of parameters set by you or no power saving
features.
Hard Disk
Timeout: ■ Off
■ 30 seconds to 20
Minutes
[Off] Sets the length of time that the hard drive can be inactive before your note-
book automatically turns off the power to the hard drive controller and
drive motor. If you choose a factory installed combination of parameters
this field will display the setting. If you choose to customize the parameters
you will be able to set this yourself. The options available vary from Off,
which has no inactivity shutoff, to 20 minutes.
Standby
Timeout: ■ Off
■ 1 to 16 Minutes
[16 Minutes] Sets the length of time without any user input device activity before the
CPU is set to half speed and the display and the hard drive are turned off. If
you choose a factory combination of parameters this field will display the
setting. If you choose to customize the parameters you will be able to set
this yourself.
Auto Suspend
Timeout: ■ Off
■ 5 to 60 minutes
[Off] Sets the length of time without I/O activity before your notebook goes into
Suspend mode. If you choose a factory combination of parameters this field
will display that setting. If you choose to customize the parameters you will
be able to set this yourself. Off has no inactivity suspension.
Suspend
Mode: ■ Suspend
■ Save to Disk
[Suspend] Sets the form of suspension state. If you choose Suspend, you will suspend
operation with power to system memory, and everything else powered
down or in a very low power state. If you choose Save-to-Disk your note-
book will save all of system memory and the operating parameters to the
hard drive before turning your notebook to the pseudo-off condition.
Auto Save
To Disk:
■ Off
■ After 1 Hour
[Off] When set to After 1 Hour your notebook will automatically save all of
system memory and the operating parameters to the hard drive and go to
the pseudo-off if you leave your notebook in Suspend mode for an hour.
Resume On
Modem Ring: ■ Off
■ On
[Off] Sets whether or not to Resume from a suspension state when a message is
received by telephone line. This feature will not operate if the Save-to-Disk
mode is enabled. This feature applies to internal and external modems.
Resume On
Time: ■ Off
■ On
[Off] Sets whether or not to resume from a suspension state at a designated
time. This feature is available from either Suspend mode or Save-to-Disk
mode.
Resume Time: ■ 00:00:00 to
23:59:59
[00:00:00] Sets the designated time, on a 24-hour clock, when the notebook is to
automatically resume operation from the Suspend state. The format of the
clock setting is hours:minutes:seconds. Each segment of the time is set
separately, either by incrementing or by typing in the numbers. You move
between the segments with the [Tab] key or the [Shift]+[Tab] keys. This
only applies when Resume on Time is set to On.
Advanced
Features: –— –— When selected, opens the Advanced Features submenu which allows
setting additional power saving parameters.
S e c u r i t y M e n u
Laurel BIOS.fm Page 27 Thursday, May 23, 2002 10:05 AM