Product identification, Safety – FMI SVYD18NRA User Manual

Page 4

Advertising
background image

www.fmiproducts.com

113084-01L

4

6. Do not add extra logs or ornaments such as

pine cones, vermiculite or rock wool. Using
these added items can cause sooting.

7. This log heater is designed to be smoke-

less. If logs ever appear to smoke, turn off
heater and call a qualified service person.
Note: During initial operation, slight smok-
ing could occur due to log curing and
heater burning manufacturing residues.

8. To prevent the creation of soot, follow the

instructions in Cleaning and Maintenance,
page 18.

9. Before using furniture polish, wax, carpet

cleaners or similar products, turn heater
off. If heated, the vapors from these prod-
ucts may create a white powder residue
within burner box or on adjacent walls or
furniture.

10. This heater needs fresh, outside air ven-

tilation to run properly. This heater has an
Oxygen Depletion Sensing (ODS) safety
shutoff system. The ODS shuts down the
heater if not enough fresh air is available.
See Air for Combustion and Ventilation,
page 5. If heater keeps shutting off, see
Troubleshooting, page 17.

11. Do not run heater

• where flammable liquids or vapors are

used or stored

SAFETY

Continued

• under dusty conditions

12. Do not use this stove to cook food or burn

paper or other objects.

13. Do not use heater if any part has been ex-

posed to or under water. Immediately call
a qualified service technician to inspect
the room heater and to replace any part
of the control system and any gas control
which has been under water.

14. Do not operate heater if any log is broken.

Do not operate heater if a log is chipped
(dime-sized or larger).

15. Turn heater off and let cool before servic-

ing. Only a qualified service person should
service and repair heater.

16. Operating heater above elevations of

4,500 feet could cause pilot outage.

17. To prevent performance problems, the use

of a propane/LP tank of less than 100 lb.
capacity (propane/LP units only).

18. Provide adequate clearances around air

openings.

19. Screen must be completely closed be-

fore using heater. Never run heater with
screen open.

Figure 1 - Typical Stove Cabinet Model with Gas Log Heater

(Shown is Oxford™ Model with Model SVYD18PRA/NRA Heater)

Stove
Body

Stove Door
(Shown in the
open position)

Piezo
Ignitor

Control Knob

One Piece
Log Set Inside
Stove Cavity

Gas Log Heater
Base Assembly

Flame Adjustment Knob

Optional Remote
Selector Switch

PRODUCT IDENTIFICATION

Advertising
This manual is related to the following products: