Furuno UAIS TRANPONDER FA-150 - Manual (Page 92)

APPENDIX
AP-3
Menu Tree - Inland AIS
ADRS TYPE
(BROAD CAST, ADRS CAST)
MMSI
MSG TYPE
(NORMAL, SAFETY)
CHANNEL
(ALTERNATE, BOTH A & B, A, B)
RETRY TIMES (0-3)
CREATE MSG
TX LOG
RX LOG
SET MSG TYPE
SET MSG
SEND MSG
TEXT
ETA/RTA
NO. OF PERSONS
EMMA WARNING
WATER LEVEL
[MENU] key
MSG
MODE (STANDARD, MONITOR, SERVICE, DISABLE)
IP ADDRESS (000.000.000.000 - 255.255.255.255; 172.031.024.001)
SUB NET MASK (000.000.000.000 - 255.255.255.255; 255.255.000.000)
PORT NO. (0 - 65535; 10000)
IP ADDRESS (000.000.000.000 - 255.255.255.255; 172.031.024.001)
SUB NET MASK (000.000.000.000 - 255.255.255.255; 255.255.000.000)
NAVNET PORT NO. (10000 - 30000; 10000)
GATEWAY ADDRESS (000.000.000.000 - 255.255.255.255)
HOSTNAME (AIS0 - AIS9)
AIS OUTPUT (AUTO, CONTINUOUS)
GPS OUTPUT (AUTO, CONTINUOUS)
ZDA OUTPUT (AUTO, CONTINUOUS)
SENSOR STATUS (Display sensor status.)
INTERNAL GPS (Displays data about internal GPS receiver.)
(Continued on next page)
USER SETTINGS
INITIAL
SETTINGS
SET INT ANT POSN A (0-511 (m))
B (0-511 (m))
C (0-63 (m))
D (0-63 (m))
SET MMSI (MMSI, IMO NO., NAME, CALL SIGN, ENI)
SET EXT ANT POSN
SET SHIP TYPE (Type no.)
A (0-511 (m))
B (0-511 (m))
C (0-63 (m))
D (0-63 (m))
Note: The INITIAL SETTINGS sub-menu
shown here is the one accessed with a
password, which permits changing of
settings. If accessed without a password,
in which case "SET" in a menu title is
replaced with "VIEW" and settings cannot
be changed.
SET I/O SET
COM
PORT
SET PC
PORT
SET LAN
PORT*
VIEW PRIORITY
VIEW QUALITY
MODE (STANDARD, MONITOR, SERVICE, BEACON, DISABLE)
SPEED (4800BPS, 9600BPS, 19.2KBPS, 38.4KBPS, 57.6KBPS)
SET COM1 MODE (LONG RANGE, EXT DISPLAY, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM2 MODE (EXT DISPLAY, MONITOR, HI LEVEL IF, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM3 (Same as SET COM2.)
SET COM4 MODE (SENSOR, EXT DISPLAY, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM5 MODE (SENSOR(Fixed)
SPEED (IEC61162-1, IEC61162-2)
SET COM6 MODE (SENSOR(Fixed)
SPEED (IIEC61162-1, IEC61162-2, AD-10)
* Shown when
optional LAN kit
is installed.
PORT
SET BLUE SIGN SW (AVAILABLE, NOT AVAILABLE)
* 1 : For PC Network
* 2 : For NAVNET 3D
* 2
* 1
CREATE MSG
ETA LOG
RTA LOG
SET MSG TYPE
SET DESTINATION
SET ETA
SEND MSG
COUNTRY CODE, LOCATION CODE,
FAIRWAY NO., TERMINAL CODE,
FAIRWAY HECT
ETA (DATE, TIME), AIR DRAUGHT,
NO. OF TUGBOATS
CREATE MSG
TX LOG
ADRS TYPE
(BROAD CAST, ADRS CAST)
MMSI
TYPE
(SOLAS(IFM16), INLAND(RFM55))
CHANNEL
(ALTERNATE, BOTH A & B, A, B)
RETRY TIMES (0-3)
SET MSG TYPE
VIEW MSG
SEND MSG
CPA (0.0-6.00 (NM))
TCPA (0-60 (min))
ALARM MODE (ON, OFF)
ALARM BUZZER (ON, OFF)
KEY BEEP (ON, OFF)
ALARM BUZZER (ON, OFF)
AUTO SORT (ON,OFF)
DISP SART TEST (ON, OFF
LR MODE (AUTO, MANUAL)
RECEIVED MSG
CPA/TCPA ALARM
POPUP (ALL, ABM, OFF)
BUZZER (ON, OFF)