FUJITSU Embedded MegaRAID SATA CA97232-0014-01EN - Manual (Page 9)

Supplement for Embedded MegaRAID SATA User ’s Guide
¾ “4.4.4 Uninstallation of HDD Check Scheduler” (page 71)
The procedure of the “4.4.4 Uninstallation of HDD Check Scheduler” on page 71 is partially modified
as follows;
Step 2 Click [Start] button – [All Programs] (or [Programs]) – [Accessories] – [Command
Prompt].
The above procedure is no longer needed when ServerCore is installed with Windows Server
2008.
Step 4 Write down the [ID] value for the row with the following value in the [Command Line]
column:
When in Windows Server 2008, operate in the same manner as Windows 2003.
Refer to the Procedure of Windows Server 2003 for implementation.
¾ “4.5.1 Preparation and Precautions for using ServerView RAID
Manager” (page 72)
Regarding the article in “● General precautions” on page 72, further information is added as follows;
・
Web browser cannot be operated when ServerCore is installed with Windows Server 2008. In
this situation, prepare the server or client PC for Windows to implement ServerView RAID
Manager
for management of the Array Controller when in ServerCore installation with
Windows Server 2008.
¾ “4.6.3 Layout of the Tree View” (page 81)
As for “4.6.3 Layout of the Tree View” on page 81, include the information as follows;
-------------- ●Scheduler
This function is not supported. It is displayed only with ServerVIew RAID V3.x.xx-x or later.
9 / 13