FUJITSU PRIMERGY RX900 S1 - Manual (Page 99)

RX900 S1 Maintenance Manual 99
Hard disk and solid state drives
6.4.13 Completing the task
Ê Perform the following procedures to complete the task:
1. Insert all HDD/SSD modules, see "Unlocking the HDD/SSD module" on
page 82 and "Inserting the HDD/SSD module" on page 83 .
I
Make sure that you reinstall the module in the bay it was located
before the SAS backplane replacement.
2. Insert all CPUMEMRs, see "Inserting the CPUMEMR in the slot" on
page 186
I
Make sure that you reinstall the CPUMEMR in the slot it was
located before the SAS backplane replacement.
3. "Closing the server" on page 47
4. "Mounting the server in the rack" on page 49
5. "Bringing the server back to operation" on page 51
6. "Closing the rack door" on page 51