Freecom Technologies FSG-3 - Manual (Page 61)

GB
9
61
Chapter 9: Attaching external USB devices
9.1 USB external device information
Information on attached external USB mass storage devices can be found in the
information section of the FSG-3 configuration pages. The USB information is
located under the Devices heading:
9.2 USB Mass storage installation
To add additional storage to the FSG-3, please plug a USB mass storage device
(either flash disk (by using a card reader), hard disk or optical drive) to one of the
USB host ports. Then switch on the external USB device. The storage on the USB
device should show up as a shared folder. If you are using SMB (windows file
sharing) this can take up to several minutes before your windows computer is
aware there is a new folder. If you are using a browser (HTML) to see your files,
you can press refresh.
This shared folder can be reached via FTP, HTML and SMB (Windows file sharing).
The folder will be mounted with read and write rights for all in the root directory
(/). You can set more restrictive rights after the device is connected. Please read
the chapter on user and group creation and setting folder rights.
Attention: Optical drives (e.g. DVD writers) can only be used as
read-only devices!
Attention: when connecting a card reader, the flash disk has to be
inserted in the card reader before connecting the card reader to
the FSG-3!
Attaching external USB devices