Freecom Technologies FSG-3 - Manual (Page 65)

GB
10
65
Chapter 10: Attaching external S-ATA devices
To install a S-ATA external storage device, you must first shutdown the FSG-3. Go
to the web interface and log in to the administration site. Go to the shutdown
item of the Hardware menu and press shutdown. Wait till the FSG-3 is shutdown
and plug in the eS-ATA connector of the external device into the FSG-3 eS-ATA
port. Make sure the eS-ATA device is powered on and turn the FSG-3 back on.
The storage on the eS-ATA device should show up as a shared folder. This shared
folder can be reached via FTP, HTML and SMB (Windows file sharing). The folder
will be mounted with read and write rights for all in the root folder (/).
Filesystems
An attached S-ATA Disk must be formatted in a file system supported by the FSG-
3. The supported file systems are:
FAT32
NTFS (read-only)
ext2
ext3
reiserfs
HFS(+) (read-only)
Remark: To have read/write access on the external disk, we
recommend formatting the disk in FAT32 format.
Attaching external S-ATA devices