FMI MF42ONE - Manual (Page 11)

www.fmiproducts.com 125636-01A 11
INSTALLATION
Continued
Figure 17 - Installing Right Front Log
Figure 17A - Installing Right Front Log, Top View
Burner
Tube
Grate Finger
Right Front Log
(D-019 or D027)
Round Tube
Burner
Grate Finger
Figure 18 - Installing Back Left Log
Figure 17B - Installing Right Front Log, Top View
Figure 17C - Installing Right Front Log, Side View
Burner Tube Square Grate
Find the back left log (LMF42-SC: D-018 or LMF48-SC: 2.
D026). See Figures 18, 18A, and 18B. Figure 18A shows
how the log must fit against the end of the burner. Figure
18B shows how the notch in log fits against the vertical
portion of the burner tube. Place this log on the base
assembly by inserting it from the left side as shown in
Figure 18. You will need to twist the log slightly to get it to
fit against the burners properly. It will rest even with the
back edge of the pan.
Back Left Log
(D-018 or D026) Flat Part of Log
Log Notch
Burner Tube